Posts Tagged ‘walls’
Place bath. Is the perfect place for a reservoir (rivers, lakes, ponds), but not in the water, and at a distance of 15-30 m, where dry, there is no threat of flooding. It should be kept in mind that the used water from the bath in any case is not obliged to fall into the pond and pollute it. It is better that the sauna was far from the road, in a quiet place, fenced off from passers-by trees, farm buildings or a fence. Suitable for construction and steep slope. In this case, the bath can be done in a dugout or poluzemlyanki with terrace on the posts.
You have decided to build a sauna in the countryside or on the dacha. And soon appear voprostsy: What size must be a bath, where it have on the site, from which we build a wall, floor, ceiling, doors, windows, need a bath under the foundation and many other voprostsev.
Read the rest of this entry »
Monolithic walls can be reinforced with wood sticks, pieces of planks and iron fittings. Door and window boxes better set in advance, wrapping them Toll, ie, providing waterproofing.
Most best is the ceiling made of wood with a low content of resin. Wood ceiling can be prefabricated, grazing, boarding.
Read the rest of this entry »
Substitutes stones. A good substitute stones are broken pottery and porcelain. They are heat-resistant and can withstand sudden temperature configuration. Traditionally, pieces of these materials are small and suited only for the upper layer of stone filling. You can also use pieces of brick, the ideal of burned brick, iron ore – a deformed shape with melted edges, which are not suitable for masonry.
Over time, the stones crack and crumble. Therefore one should once a year to pick stones shattered substitute whole, clean detail, which clogs the channels between the stones. It is better to have a bath in some stores pebbles, so that each time they do not expect to find the summer.
Read the rest of this entry »
From time to time the furnace-heated stove unchanging act tough with fuel. In any form of fuel combustion chamber and channels for the flue gases in such furnaces is separated from the stone wall backfill or metal plate. On the one hand, it prevents the ingress of combustion products in the bath, with a party that protects the stones from the deposition of soot, which can be captured in the next ferry and pollute the air in the steam bath.
Furnace "in black. Maximum efficiency is achieved when the furnace firebox it "in black", when the gases are released through the bathhouse. But such a method of heating the most fire-safe. Apart from the fact, not very pleased with soot-covered walls and ceiling. For this reason baths "in black" as soon as practically do not build.
Read the rest of this entry »
Every 4005-6 m2. At the entrance to the bath arrange passage, it prevents the penetration of cool air inside the premises. In compact baths often combine washing and steam room. To separate baths for Construction of a waiting room to be sure. If planning to take a bath in the warm season, the Vice changing room is possible to build a terrace. In the baths well equipped and have a terrace, and a waiting room. But every developer changes the set of premises and their size at their discretion. Changing room sizes taken based on the fact that 1 person must account for more than 1,3-1,5 m, width – more than 1 meter. Waiting room should be insulated, the windows wide with the highest sill, over 140 cm from the floor. It must be everything: from clothes hangers to wood and coal. In a waiting room is a combined washing room for washing and steaming. At each bathers must account for more than 1 m2 area. Steam –
Implementation angles in Oblomov, "in his paw." From wreaths piled blockhouse. If felling of logs stacked, the ends of their traditionally fall outside the boundaries of the walls. Such a corner is called "in Oblomov." To save material, the corners do not yield all – in his paw. Framework "in the paw" perform a similar size of logs, timber must be of high quality.
Preparation is the walls. The walls of the boards of most ordinary, they are made of logs, making their first filing. In the corners of the boards unite in Oblomov, "in his paw. Indigenous and inserted pins attached to the strength of this design. Between the rails log stack insulation material.
Read the rest of this entry »
Shortcomings pier foundation: do not build on their baths from languid designs, soil must be from the volumes of sand.
vetrivaniya their remains pleasant atmosphere at the expense of flavor of the wood, a warm feeling at the touch wood.
Read the rest of this entry »
Thermal conductivity is extremely low in the dry materials, because the pores are filled with air. If such material is moistened, the pores are filled with water, and thermal conductivity of water is 20 times higher than that of air. And if the cool time of year the water in the pores freezes, then the zone of thermal conductivity increases as early as 3-4 times. At low air temperature increases the size of the ice and destroys the tree. Because the walls and ceilings in the bath should be on the inside parogidroizolyatsionnuyu protection.
Steam insulating materials: foil with fiberglass, duralumin foil, plastic films, vellum, Tol. Toll at the highest temperature produces foul smell, because of its use in the steam room is not worth it. Vapor-into bond materials are placed under the interior wood paneling, on top of insulating materials.
Read the rest of this entry »
Stamped on the tree line must be on the left side of the saw does not cut away. To make it comfortable to work, bow saw blade saws with handles are turning to the right so, that it was a machine workpiece material at an angle of 30-40 °. This situation saw – very comfortable.
Chiseling and drilling nests. Nests need to insert the pins and for other purposes. After determining the size of nests
Read the rest of this entry »
Oposlya massage the shoulder joint, massage klyuchich-but-acromial and clavicular-sternal junction, where the use of stroking and circular and longitudinal grinding. Penetration of Siim joints can only be ahead. In conclusion, this part of the massage create movement in the joints of the shoulder.
Right behind the shoulder massage go to massage the shoulder joint, which begins with massaging shoulder girdle muscles. Massage articular bags shoulder joint to create the front, rear and bottom surfaces. For better access to the anterior glenoid bag should lay his hand massaged his back. In such a situation capitellum pushed forward and prominence to the front wall of the articular bags shoulder joint.
Read the rest of this entry »
